Python源码示例：binascii.a2b_uu()
示例1
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例2
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例3
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例4
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = bytes()
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu(b"\x7f"), b"\x00"*31)
self.assertEqual(binascii.a2b_uu(b"\x80"), b"\x00"*32)
self.assertEqual(binascii.a2b_uu(b"\xff"), b"\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, b"\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, b"!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*b"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu(b'x'), b'!> \n')
示例5
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = bytes()
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu(b"\x7f"), b"\x00"*31)
self.assertEqual(binascii.a2b_uu(b"\x80"), b"\x00"*32)
self.assertEqual(binascii.a2b_uu(b"\xff"), b"\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, b"\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, b"!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*b"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu(b'x'), b'!> \n')
示例6
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例7
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = bytes()
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu(b"\x7f"), b"\x00"*31)
self.assertEqual(binascii.a2b_uu(b"\x80"), b"\x00"*32)
self.assertEqual(binascii.a2b_uu(b"\xff"), b"\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, b"\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, b"!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*b"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu(b'x'), b'!> \n')
示例8
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.data[i:i+MAX_UU]
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
b = binascii.a2b_uu(line)
res += b
self.assertEqual(res, self.data)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
示例9
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例10
def test_uu(self):
MAX_UU = 45
lines = []
for i in range(0, len(self.data), MAX_UU):
b = self.type2test(self.rawdata[i:i+MAX_UU])
a = binascii.b2a_uu(b)
lines.append(a)
res = ""
for line in lines:
a = self.type2test(line)
b = binascii.a2b_uu(a)
res += b
self.assertEqual(res, self.rawdata)
self.assertEqual(binascii.a2b_uu("\x7f"), "\x00"*31)
self.assertEqual(binascii.a2b_uu("\x80"), "\x00"*32)
self.assertEqual(binascii.a2b_uu("\xff"), "\x00"*31)
self.assertRaises(binascii.Error, binascii.a2b_uu, "\xff\x00")
self.assertRaises(binascii.Error, binascii.a2b_uu, "!!!!")
self.assertRaises(binascii.Error, binascii.b2a_uu, 46*"!")
# Issue #7701 (crash on a pydebug build)
self.assertEqual(binascii.b2a_uu('x'), '!> \n')
示例11
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例12
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例13
def uudecode(buffer: Union[bytes, str]):
"""
uudecode an input buffer; based on python library uu but with support for byte stream
:param buffer:
:return:
"""
# Create in_file from buffer
in_file = io.BytesIO(buffer)
out_file = io.BytesIO()
while True:
hdr = in_file.readline()
if not hdr.startswith(b'begin'):
continue
hdrfields = hdr.split(b' ', 2)
if len(hdrfields) == 3 and hdrfields[0] == b'begin':
try:
int(hdrfields[1], 8)
break
except ValueError:
pass
s = in_file.readline()
while s and s.strip(b' \t\r\n\f') != b'end':
try:
data = binascii.a2b_uu(s)
except binascii.Error as _:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0] - 32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
out_file.write(data)
s = in_file.readline()
return out_file.getvalue()
示例14
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例15
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例16
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例17
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例18
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例19
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例20
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例21
def test_empty_string(self):
# A test for SF bug #1022953. Make sure SystemError is not raised.
for n in ['b2a_qp', 'a2b_hex', 'b2a_base64', 'a2b_uu', 'a2b_qp',
'b2a_hex', 'unhexlify', 'hexlify', 'crc32', 'b2a_hqx',
'a2b_hqx', 'a2b_base64', 'rlecode_hqx', 'b2a_uu',
'rledecode_hqx']:
f = getattr(binascii, n)
f('')
binascii.crc_hqx('', 0)
示例22
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例23
def rob_uu_decode(text):
res = ''
lines = text.strip().split('\n')
for line in lines:
decoded_line = a2b_uu(line)
res += decoded_line
return res
示例24
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例25
def uu_decode(input, errors='strict'):
assert errors == 'strict'
infile = BytesIO(input)
outfile = BytesIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError('Missing "begin" line in input data')
if s[:5] == b'begin':
break
# Decode
while True:
s = readline()
if not s or s == b'end\n':
break
try:
data = binascii.a2b_uu(s)
except binascii.Error as v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((s[0]-32) & 63) * 4 + 5) // 3
data = binascii.a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
if not s:
raise ValueError('Truncated input data')
return (outfile.getvalue(), len(input))
示例26
def uu_decode(input,errors='strict'):
""" Decodes the object input and returns a tuple (output
object, length consumed).
input must be an object which provides the bf_getreadbuf
buffer slot. Python strings, buffer objects and memory
mapped files are examples of objects providing this slot.
errors defines the error handling to apply. It defaults to
'strict' handling which is the only currently supported
error handling for this codec.
Note: filename and file mode information in the input data is
ignored.
"""
assert errors == 'strict'
from cStringIO import StringIO
from binascii import a2b_uu
infile = StringIO(str(input))
outfile = StringIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError, 'Missing "begin" line in input data'
if s[:5] == 'begin':
break
# Decode
while 1:
s = readline()
if not s or \
s == 'end\n':
break
try:
data = a2b_uu(s)
except binascii.Error, v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((ord(s[0])-32) & 63) * 4 + 5) / 3
data = a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
示例27
def uu_decode(input,errors='strict'):
""" Decodes the object input and returns a tuple (output
object, length consumed).
input must be an object which provides the bf_getreadbuf
buffer slot. Python strings, buffer objects and memory
mapped files are examples of objects providing this slot.
errors defines the error handling to apply. It defaults to
'strict' handling which is the only currently supported
error handling for this codec.
Note: filename and file mode information in the input data is
ignored.
"""
assert errors == 'strict'
from cStringIO import StringIO
from binascii import a2b_uu
infile = StringIO(str(input))
outfile = StringIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError, 'Missing "begin" line in input data'
if s[:5] == 'begin':
break
# Decode
while 1:
s = readline()
if not s or \
s == 'end\n':
break
try:
data = a2b_uu(s)
except binascii.Error, v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((ord(s[0])-32) & 63) * 4 + 5) // 3
data = a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
示例28
def uu_decode(input,errors='strict'):
""" Decodes the object input and returns a tuple (output
object, length consumed).
input must be an object which provides the bf_getreadbuf
buffer slot. Python strings, buffer objects and memory
mapped files are examples of objects providing this slot.
errors defines the error handling to apply. It defaults to
'strict' handling which is the only currently supported
error handling for this codec.
Note: filename and file mode information in the input data is
ignored.
"""
assert errors == 'strict'
from cStringIO import StringIO
from binascii import a2b_uu
infile = StringIO(str(input))
outfile = StringIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError, 'Missing "begin" line in input data'
if s[:5] == 'begin':
break
# Decode
while 1:
s = readline()
if not s or \
s == 'end\n':
break
try:
data = a2b_uu(s)
except binascii.Error, v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((ord(s[0])-32) & 63) * 4 + 5) / 3
data = a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
示例29
def uu_decode(input,errors='strict'):
""" Decodes the object input and returns a tuple (output
object, length consumed).
input must be an object which provides the bf_getreadbuf
buffer slot. Python strings, buffer objects and memory
mapped files are examples of objects providing this slot.
errors defines the error handling to apply. It defaults to
'strict' handling which is the only currently supported
error handling for this codec.
Note: filename and file mode information in the input data is
ignored.
"""
assert errors == 'strict'
from cStringIO import StringIO
from binascii import a2b_uu
infile = StringIO(str(input))
outfile = StringIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError, 'Missing "begin" line in input data'
if s[:5] == 'begin':
break
# Decode
while 1:
s = readline()
if not s or \
s == 'end\n':
break
try:
data = a2b_uu(s)
except binascii.Error, v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((ord(s[0])-32) & 63) * 4 + 5) / 3
data = a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
示例30
def uu_decode(input,errors='strict'):
""" Decodes the object input and returns a tuple (output
object, length consumed).
input must be an object which provides the bf_getreadbuf
buffer slot. Python strings, buffer objects and memory
mapped files are examples of objects providing this slot.
errors defines the error handling to apply. It defaults to
'strict' handling which is the only currently supported
error handling for this codec.
Note: filename and file mode information in the input data is
ignored.
"""
assert errors == 'strict'
from cStringIO import StringIO
from binascii import a2b_uu
infile = StringIO(str(input))
outfile = StringIO()
readline = infile.readline
write = outfile.write
# Find start of encoded data
while 1:
s = readline()
if not s:
raise ValueError, 'Missing "begin" line in input data'
if s[:5] == 'begin':
break
# Decode
while 1:
s = readline()
if not s or \
s == 'end\n':
break
try:
data = a2b_uu(s)
except binascii.Error, v:
# Workaround for broken uuencoders by /Fredrik Lundh
nbytes = (((ord(s[0])-32) & 63) * 4 + 5) / 3
data = a2b_uu(s[:nbytes])
#sys.stderr.write("Warning: %s\n" % str(v))
write(data)
